Cordless Robotic
Pool Cleaner

Pool steps vary in size and shape. While the GT Freedom handles many common step types, some—especially shorter, narrower ones—may be challenging. We recommend brushing any debris on the steps onto the pool floor, allowing the robot to pick it up more effectively.

For optimal performance, remove the robot after each cleaning cycle and clean the filter basket. Using Madimack's robotic filter cleaner ensures all dirt, debris, and oils are properly removed.

The GT Freedom operates in pools with depths between 0.4 and 3 meters. It will automatically stop running if the water depth is below 40 cm to protect the motor.

The robot operates in temperatures between 4°C and 35°C. It is not recommended for use in near-freezing conditions.

To ensure the best performance and longevity of your robot, we strongly advise against using it in spas with temperatures above 35°C.

Battery endurance is determined under controlled conditions (clean pool, minimal slope, balanced water chemistry). Real-world factors like clogged filters, water chemistry, temperature, and incline may reduce battery life by up to 25% in extreme conditions. If you're concerned about battery performance, Madimack offers service testing.

• i30: 3 hours
• i45: 4.5 hours
• i60: 6 hours
• i80: 8 hours

Yes, selecting both wall and floor modes will reduce run time compared to floor-only cleaning.

Ensure the magnetic cap is not inserted, as this can interfere with charging.

Insert the magnetic cap for 2 seconds and then remove it to reset the robot. If I'm not using the robot for more than 14 days, is there any maintenance needed? Insert the magnetic cap and leave it in place to protect the battery.

The GT Freedom will move to the closest wall when the battery is low or after completing its cycle. Use the retrieval hook (included as an accessory) to remove it from the pool.

Use our online sizing tool to determine the best model for your pool.

Several factors can affect wall-climbing performance:

• Poor water chemistry
• A full or clogged filter basket
• Battery level below 30%
• Pool jets disrupting the robot's movement

• 1 green light: 30-minute cleaning cycle
• 2 green lights: 1-hour cleaning cycle
• 3 green lights: 2-hour cleaning cycle
• No lights: Battery is low- continuous operation until the battery is depleted

No. Wi-Fi does not work underwater, so the GT Freedom cannot be turned on or off via the app while submerged.

The GT Freedom connects to the app only when using a 2.4 GHz Wi-Fi band.

• i30: Up to 3 hours of run time
• i45: Up to 4.5 hours of run time
• i60: Up to 6 hours of run time
• i80: Up to 8 hours of run time

The GT Freedom comes with a 3-year return-to-base warranty where necessary.