Meet Australia's Most Efficient Hot Water System. Government Rebate Included.
The resiSTEAM Pro combines high-temperature performance, lower electricity use and smart solar integration, with government STC rebates for even greater savings.
Performance
and Savings
Uses up to 80% less electricity than a conventional electric hot water system, with a COP of 5.4 and an A+ energy rating.
- A+Government-Certified
Energy Rating - STCGovernment Rebate Applies With or Without Solar
Lower Carbon
FootprintLower Running
Costs
Solar PV Compatible:
Heat for FREEHigh-Temperature Heating
of up to 75°CWi-Fi Remote
MonitoringR-290 Refrigerant:
Natural, Eco-FriendlyLarge Screen
Touch Display
Set It Once. Forget It for Years.
The resiSTEAM Pro does one job, perfectly: consistent hot water for your household, at the lowest possible cost.
Extracts Heat
from AirThe inverter compressor draws heat from the ambient air (even down to -7°C) and transfers it to your water tank. Uses a fraction of the electricity of a conventional system.
Prioritises
Solar EnergyWhen your solar panels are producing at peak (10 am – 2 pm), PV Smart Mode automatically switches to use your solar generation first, heating water for free.
Stores 300 L. Ready When You Need It.
With its massive water storage capacity, you have an abundant supply of hot water heated, ensuring it is always ready when you need it.
You Already Produce Clean Energy. Stop Paying to Heat Your Water.
Most Australian homes with solar panels sell their excess energy back to the grid for a few cents per kilowatt. Meanwhile, they pay full price to heat their hot water with gas or old electric tanks.
The resiSTEAM Pro's PV Smart Mode changes that. When your solar panels are producing at peak, (typically 10 am to 2 pm), the system automatically priorities heating your water using your own solar energy. Free hot water, produced by the panels you already own.
the new premium mainstream.
Solar APEX Mode seamlessly integrates with PV solar systems, allowing resiSTEAM PRO to prioritise solar energy during peak production hours.
You're Entitled to a Government STC Rebate. Here's How It Works.
When you replace a gas or electric hot water system with an eligible heat pump like resiSTEAM Pro, the Federal Government's Small-Scale Renewable Energy Scheme (SRES) entitles you to Small-Scale Technology Certificates (STCs)
Your installer claims these STCs on your behalf and passes the value back to you as a discount at the point of installation. The rebate amount depends on your postcode and the date of install. Free hot water, produced by the panels you already own.
- Use the free calculator below to estimate your rebate amount based on your postcode.
- Your accredited installer claims the STCs from the government on your behalf.
- The rebate value is deducted from your installation cost. You pay less upfront. No paperwork required.
Built to Perform. Designed to Last.
Full DC Inverter Technology
The inverter compressor draws heat from the ambient air (even down to -7°C) and transfers it to your water tank, using a fraction of the electricity of a conventional system while delivering an impressive COP of 5.4 and an A+ rating.
PV Smart Solar Integration
Featuring Solar APEX Mode, it offers three operating modes (Simple, Inverter Activated, Combined) for full compatibility with any solar PV setup, automatically prioritising solar energy during peak production hours.
R290 Natural Refrigerant
With a Global Warming Potential of only 3, this is the most environmentally responsible refrigerant available. It delivers natural, high-efficiency performance aligned with Australia's decarbonisation direction
Enamel Tank: BTC245R Liner
Having successfully passed 280,000 pulse test cycles, it forms a robust barrier against rust and corrosion while preventing water contamination—engineered for a long service life in Australian conditions.
Auto-Defrost & Auto-Operation
Operating seamlessly in ambient temperatures from -7°C to +47°C, built-in auto-defrost ensures reliable performance in cold conditions while smart auto-operation requires zero input from you.
WiFi Smart Controls
Manage your system entirely from your phone. Set schedules, track energy use, and adjust temperature preferences effortlessly without ever touching the unit.
Estimate Your STC Rebate
Enter your details below. Get your estimated rebate amount and a personalised quote, instantly.
Everything You Need to Know.
High-Temperature Capability
Heats water to up to 75°C. Consistent, stable supply suitable for all daily hot water needs including high-demand families.
Smart Sterilisation Function
Automatic sterilisation cycle eliminates bacteria growth in the tank. Set and forget. The system manages its own hygiene without input.
Auxiliary Electric Heating Element
1,000 W backup heating element activates automatically if ambient temperature is too low for heat pump operation alone. Consistent hot water regardless of conditions.
High-Pressure Protection & IPX4 Waterproof
Rated to 0.85 MPa (850k Pa) working pressure with a maximum 3.1 MPa protection limit, this IPX4 waterproof-rated unit features micro-channel heat exchangers designed for maximum efficiency and reliability.
42 dB Quiet Operation
Quieter than a normal conversation. Suitable for installation close to living areas or neighbouring properties.
Full Specifications
| Model | NE-F27HWRS1NV-30E-U |
| Compressor Type | Inverter |
| Water Tank Capacity | 300 L |
| Water Tank Material | BTC245R Enamel Liner |
| Water Tank Rated Pressure | 850 kPa |
| Electric Heating Power | 1000 W |
| Condenser | Microchannel Heat Exchanger |
| PT Valve | 850 kPa/T99°C .46kW |
| Refrigerant Type/Weight | R290/450g |
| Heat Pump Rated Input Power | 958 W |
| Rated Input (Heat Pump + Electric Heating) | 1992 W |
| Heat Pump Heating Capacity | 2650 W |
| COP | 5.4 |
| Rated Voltage/Frequency | 220-240 V/50 Hz |
| Heat Pump Rated Current | 4.1A |
| Rated Current (Heat Pump + Electric Heating) | 8.7A |
| Maximum Suction Pressure | 0.95 MPa |
| Maximum Discharge Pressure | 3.1 MPa |
| Maximum Allowable Pressure | 3.1 MPa |
| Ambient Temperaturea | -7°C ~ +47°C |
| Factory Set Temperature | 60°C |
| Noise Level | 42 dB(A) |
| Net Weight | 126 Kg |
| Waterproof Rating | IPX4 |
| Net Dimension | Ø650X2000 mm |
| Package Dimension | 705x705x2080 mm |
Questions Before You Commit?
The 300L resiSTEAM Pro suits most households of 4 to 5 people. For busy mornings or higher demand, Rapid mode runs the electric element alongside the heat pump to heat water faster.
The resiSTEAM Pro is designed for outdoor installation and is rated IPX4. It uses R290 refrigerant, so it must not be installed in a confined or unventilated space. It needs a clean, well-ventilated spot with clear airflow around the unit, on a level concrete base. Your licensed installer will confirm the right location and clearances.
The heat pump operates in ambient temperatures down to -5°C. Below that, it stops and the built-in 1000 W electric element takes over to keep the water hot. It switches back to heat pump mode automatically once temperatures recover. Built-in automatic defrosting maintains performance in frosty conditions. In cold climates, the unit needs to be powered on so the anti-freeze function can protect the pipes. Pipework and the condensate drain line should also be insulated and protected from freezing.
Find a Local Madimack Installer
resiSTEAM Pro must be installed by an accredited plumber. Our national dealer network covers Sydney, Melbourne, Brisbane and surrounding regions. Find a dealer near you and get your installation booked.
Or contact us directly
- 1300 899 373
Operating Hours: Mon-Fri: 9 am - 6 pm, ESTsales@madimack.com - Lvl 1 / 50 Berry St North Sydney,
NSW 2060
Madimack Extended Warranty is available on eligible purchases through Madimack Authorised Dealers and Certified Online Dealers.
All Madimack products also include guarantees under the Australian Consumer Law. For full details, click here.
Madimack Hot Water - Find Out More
Ready to Stop Paying to Heat Your Water?
Estimate your STC rebate in 60 seconds. Free, instant, no obligation.