Skip to content
English
Submit a Ticket
Go to madimack.com.au
  • There are no suggestions because the search field is empty.

Overheating or Tripping the Circuit Breaker

Refer to below to know what can be done when experiencing overheating or tripping of the circuit breaker issue

Steps:

  1. Ensure proper ventilation: Check that the pump motor has adequate ventilation and is not obstructed by debris or objects. Poor ventilation can cause the motor to overheat.
  2. Verify correct voltage: Ensure that the pump is receiving the correct voltage as specified by the manufacturer. Voltage that is too high or too low can cause the motor to overheat. Consult a professional electrician if necessary.
  3. Clean the motor and fan: Dirt or debris accumulation on the motor or fan can hinder proper cooling and lead to overheating. Carefully clean these components using a soft brush or compressed air.

Note:

You may check your equipment's User Manual for further information. In case you may require any further assistance, you may reach us at Madimack Support.