Troubleshooting Guide
      Back to home
      1. Help Center
      2. Hot Water
      3. Troubleshooting Guide

      Insufficient hot water

      Steps to follow if there is insufficient hot water

      1. Check the thermostat setting: Verify that the thermostat is set to a temperature that provides sufficient hot water. Adjust the thermostat if needed.
      2. Sediment buildup in the tank: Over time, sediment can accumulate at the bottom of the water heater tank, reducing its capacity and efficiency. Drain and flush the tank to remove any sediment buildup.
      3. Insulate the hot water pipes: Insulating the hot water pipes can help minimize heat loss and ensure that hot water reaches the faucets or showers more quickly. Consider adding insulation sleeves or wraps to the pipes.